R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

156
Displaying and maintaining Ethernet link aggregation
Task Command Remarks
Display information for an
aggregate interface or multiple
aggregate interfaces.
display interface [ bridge-aggregation |
route-aggregation ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface { bridge-aggregation |
route-aggregation } interface-number [ brief ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view
Display the local system ID.
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the global or
group-specific link-aggregation
load sharing criteria.
display link-aggregation load-sharing mode
[ interface [ { bridge-aggregation |
route-aggregation } interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view
Display detailed link aggregation
information for link aggregation
member ports.
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display summary information
about all aggregation groups.
display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display detailed information about
a specific or all aggregation
groups.
display link-aggregation verbose
[ { bridge-aggregation | route-aggregation }
[ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Clear LACP statistics for a specific
or all link aggregation member
ports.
reset lacp statistics [ interface interface-list ]
Available in user
view
Clear statistics for a specific or all
aggregate interfaces.
reset counters interface [ { bridge-aggregation |
route-aggregation } [ interface-number ] ]
Available in user
view
Ethernet link aggregation configuration examples
at the CLI
NOTE:
In an aggregation group, only ports that have the same port attributes and class-two configurations (see
"Configuration classes") as the reference p
ort (see "Reference port") can operate as Selected ports. Make
sure that all member ports have the same port attributes and class-two configurations as the reference
port. The other settin
g
s only need to be confi
g
ured on the a
gg
re
g
ate interface, not on the member ports.
Layer 2 static aggregation configuration example
NOTE:
In this configuration example, either Device A or Device B is the firewall.