R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

11
Configuring IPv4-based VRRP
Configuring IPv4-based VRRP in the web interface
Configuration task list
Task Remarks
Creating a VRRP group
Required
Create a VRRP group on a VRRP interface and configure the virtual IP address.
IMPORTANT:
• Before creating a VRRP group on an interface, you should first configure an IP
address for the interface and make sure that the virtual IP address to be
configured is in the same network segment as the IP address of the interface.
• You can create up to 16 VRRP groups on an interface and up to 16 virtual IP
addresses in a VRRP group.
Configuring a VRRP group
Optional
Configure router priority, preemption mode, authentication mode, packet
attributes, and tracking function of the VRRP group.
Creating a VRRP group
Select High Reliability > VRRP from the navigation tree to enter the VRRP interfaces page, as shown
in Figure 7.
Click the icon corresponding to the interface to be configured to enter the VRRP
Configuration on Interface page, as shown in Figure 8. C
lick Add to enter the Create VRRP Group page.
Figure 7 VRRP interfaces page
Figure 8 VRRP group page