R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

27
Figure 14 Configuring VRRP group attributes
• Enter 110 in the Priority field.
• Select Preemptive from the Preempt Mode field.
• Enter 5 in the Delay field.
• Select Simple from the Authentication field.
• Enter hello in the Key field.
• Enter 5 in the Advertise Time field.
• Click Display Track Config.
• Select GigabitEthernet0/2 from the Interface field, type 30 in the Reduced Priority field, and then
click Add to add the interface to the list box of tracked interface.
• Click Apply.
Configuring Firewall B
# Configure the IP address of each interface and the zones. (Details not shown.)
# Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.111.
• Select High Availability > VRRP from the navigation tree to enter the VRRP interfaces page. Click the
icon corresponding to GigabitEthernet 0/1 to enter the VRRP Configuration on Interface page
shown in Figure 15.