R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

35
Use VRRP groups to implement load balancing and mutual backup between default gateways.
Figure 19 Network diagram
Configuring Firewall A
# Configure the IP address of each interface and the zones. (Details not shown.)
# Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.111.
• Select High Availability > VRRP from the navigation tree to enter the VRRP interfaces page. Click the
icon corresponding to GigabitEthernet 0/1 to enter the VRRP Configuration on Interface page
shown in Figure 20.
Figure 20 Creating VRRP group 1
• Enter 1 in the VRID field.
• Enter 202.38.160.111 in the Virtual IP field and click Add to add the virtual IP address to the Virtual
IP Members field.
• Click Apply.
# Create VRRP group 2 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.112.
• On the VRRP group page of GigabitEthernet 0/1, click Add to enter the page shown in Figure 21.