R3721-F3210-F3171-HP High-End Firewalls NAT and ALG Command Reference-6PW101

Parameters

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Getting Started Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display nat all to display all NAT configuration information.

Examples

# Display all NAT configuration information.

<Sysname> display nat all

NAT address-group information:

There are currently 1 nat address-group(s)

1 : from 202.110.10.10 to 202.110.10.15

NAT bound information:

There are currently 1 nat bound rule(s)

Interface: GigabitEthernet0/1

Direction: outbound ACL: 2009 Address-group: 1 NO-PAT: N

VPN-instance: ---

NAT server in private network information:

There are currently 1 internal server(s)

Interface: GigabitEthernet0/2, Protocol: 6(tcp)

Global: 5.5.5.5 : 80(www)

Local : 192.1.1.1 : 80(www)

NAT static information:

There are currently 1 NAT static configuration(s)

single static:

Local-IP : 1.1.1.1

Global-IP : 2.2.2.2

Local-VPN : ---

Global-VPN : ---

NAT static enabled information:

Interface Direction

GigabitEthernet0/4 out-static

Table 2 Command output

Field Descri

tion

NAT address-group information NAT address pool information

There are currently 1 nat

address-group(s)

For description on the specific fields, see the display nat address-group

command.