R3721-F3210-F3171-HP High-End Firewalls NAT and ALG Configuration Guide-6PW101

18
• Select Firewall > NAT Policy > Internal Server from the navigation tree, click Add in the Internal
Server field, and then perform the following operations, as shown in Figure 21.
Figure 21 Configuring an internal FTP server
• Select GigabitEthernet0/1 for Interface.
• Select 6(TCP) for Protocol Type.
• Select the option next to Assign IP Address, and then enter 202.38.1.1 in Global IP.
• Select the upper option next to Global Port and enter 21 .
• Enter 10.110.10.3 in Internal IP.
• Enter 21 in Internal Port.
• Click Apply.
# Configure the Web server 1.
• Click Add in the Internal Server field and perform the following operations, as shown in Figure 22.