R3721-F3210-F3171-HP High-End Firewalls NAT and ALG Configuration Guide-6PW101

20
Figure 23 Configuring internal Web server 2
• Select GigabitEthernet0/1 for Interface.
• Select 6(TCP) for Protocol Type.
• Select the option next to Assign IP Address, and then enter 202.38.1.1 for Global IP.
• Select the upper option next to Global Port and enter 8080.
• Enter 10.110.10.2 in Internal IP.
• Enter 80 in Internal Port.
• Click Apply.
Configuring NAT at the CLI
NAT configuration task list at the CLI
Task Remarks
Configuring address translation
Configuring static NAT
Either is
required.
Configuring dynamic NAT
Configuring an internal server Required.
Configuring DNS mapping Optional.