R3721-F3210-F3171-HP High-End Firewalls NAT and ALG Configuration Guide-6PW101

49
Figure 38 Adding a NAT address pool
# Configure dynamic NAT:
a. In the Dynamic NAT area, click Add.
b. Configure dynamic NAT as shown in Figure 39:
Select GigabitEthernet0/1.
Enter 2001 for the ACL field.
Select PAT as the address translation.
Enter 1 as the address pool index.
c. Click Apply.
Figure 39 Configuring dynamic NAT
# Configure the internal FTP server:
a. Select Firewall > NAT > Internal Server from the navigation tree and then click Add in the
Internal Server area.
b. Configure an internal FTP server as shown in Figure 40:
Select GigabitEthernet0/1.
Select 6(TCP) as the protocol type,
Enter 5.5.5.10 as the external IP address.
Enter 21 as the global port.
Enter 192.168.1.2 as the internal IP address.
Enter 21 as the internal port.
c. Click Apply.