R3721-F3210-F3171-HP High-End Firewalls NAT and ALG Configuration Guide-6PW101

53
Figure 46 Configuring a NAT address pool
# Configure dynamic NAT:
a. In the Dynamic NAT area, click Add.
b. Configure dynamic NAT as shown in Figure 47:
Select GigabitEthernet0/1.
Enter 2001 for the ACL field.
Select PAT as the address translation.
Enter 1 as the address pool index.
c. Click Apply.
Figure 47 Configuring dynamic NAT
NBT ALG configuration example
Network requirements
As shown in Figure 48, a company using the private network segment 192.168.1.0/24 wants to provide
NBT services to the outside.
Configure NAT and ALG on the Firewall so that Host A uses 5.5.5.9 as its external IP address, the WINS
server uses 5.5.5.10 as its external IP address, and Host B can access the WINS server and Host A by
using host names.