R3721-F3210-F3171-HP High-End Firewalls NAT and ALG Configuration Guide-6PW101

55
Figure 50 Configuring a static address mapping
# Configure static NAT for interface GigabitEthernet 0/1:
a. In the Interface Static Translation area, click Add.
b. Select GigabitEthernet0/1, as shown in Figure 51.
c. Click Apply.
Figure 51 Configuring interface static translation
# Configure the internal WINS server.
a. Select Firewall > NAT > Internal Server from the navigation tree and then click Add in the
Internal Server area.
b. Configure an interval WINS server as shown in Figure 52:
Select GigabitEthernet0/1.
Select 17(UDP) as the protocol type,
Enter 5.5.5.10 as the external IP address.
Enter 137 as the global port.
Enter 192.168.1.2 as the internal IP address.
Enter 137 as the internal port.
c. Click Apply.