R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

1001

977

undo if-match community [ { basic-community-list-number | comm-list-name } [ whole-match ] |

adv-community-list-number ]&<1-16>

View

Routing policy view

Default level

2: System level

Parameters

basic-community-list-number: Basic community list number, in the range of 1 to 99.

adv-community-list-number: Advanced community list number, in the range of 100 to 199.

comm-list-name: Community list name, a string of 1 to 31 characters, which can contain letters, numbers,

and signs.

whole-match: Exactly matches the specified community list(s).

&<1-16>: Indicates the argument before it can be entered up to 16 times.

Description

Use if-match community to specify community list(s) for matching against the community attribute of BGP

routing information.

Use undo if-match community to remove the match criterion.

The match criterion is not configured by default.

Related commands: ip community-list.

Examples

# Define community list 1, allowing BGP routing information with community number 100 or 200 to pass.

Then configure node 10 in permit mode of routing policy test: specify community-list 1 for matching.

<Sysname> system-view

[Sysname] ip community-list 1 permit 100 200

[Sysname] route-policy test permit node 10

[Sysname-route-policy] if-match community 1

if-match cost

Syntax

if-match cost value

undo if-match cost