R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

979
undo if-match route-type [ external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1
| is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 ] *
View
Routing policy view
Default level
2: System level
Parameters
external-type1: OSPF Type 1 external routes.
external-type1or2: OSPF Type 1 or 2 external routes.
external-type2: OSPF Type 2 external routes.
internal: Internal routes (OSPF intra-area and inter-area routes).
is-is-level-1: IS-IS Level-1 routes.
is-is-level-2: IS-IS Level-2 routes.
nssa-external-type1: OSPF NSSA Type 1 external routes.
nssa-external-type1or2: OSPF NSSA Type 1 or 2 external routes.
nssa-external-type2: OSPF NSSA Type 2 external routes.
Description
Use if-match route-type to configure a route type match criterion.
Use undo if-match route-type to remove the match criterion.
The match criterion is not configured by default.
The following matrix shows the keyword and firewall compatibility:
Ke
y
word F1000-A-EI/S-EI F1000-E F5000 Firewall module
is-is-level-1 No No Yes No
is-is-level-2 No No Yes No
Examples
# Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type internal
if-match tag
Syntax
if-match tag value
undo if-match tag
View
Routing policy view