R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

983
[Sysname-route-policy]
IPv4 routing policy configuration commands
apply ip-address next-hop
Syntax
apply ip-address next-hop ip-address
undo apply ip-address next-hop
View
Routing policy view
Default level
2: System level
Parameters
ip-address: IP address of the next hop.
Description
Use apply ip-address next-hop to set a next hop for IPv4 routing information.
Use undo apply ip-address next-hop to remove the clause configuration.
No next hop is set for IPv4 routing information by default.
This command cannot set a next hop for redistributed routes.
Examples
# Configure node 10 in permit mode of routing policy policy1 to set next hop 193.1.1.8 for routes
matching AS-PATH list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply ip-address next-hop 193.1.1.8
display ip ip-prefix
Syntax
display ip ip-prefix [ ip-prefix-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-prefix-name: IP prefix list name, a string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.