R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

995
close-mode wait
Syntax
close-mode wait
undo close-mode wait
View
SSL server policy view
Default level
2: System level
Parameters
None
Description
Use close-mode wait to set the SSL connection close mode to wait mode. In this mode, after sending a
close-notify alert message to a client, the server does not close the connection until it receives a
close-notify alert message from the client.
Use undo close-mode wait to restore the default.
By default, an SSL server sends a close-notify alert message to the client and closes the connection
without waiting for the close-notify alert message from the client.
Related commands: display ssl server-policy.
Examples
# Set the SSL connection close mode to wait.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] close-mode wait
display ssl client-policy
Syntax
display ssl client-policy { policy-name | all } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
policy-name: SSL client policy name, a case-insensitive string of 1 to 16 characters.
all: Displays information about all SSL client policies.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.