R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

97
Default level
2: System level
Parameters
stp: Configures the spanning tree device to work in STP-compatible mode.
rstp: Configures the spanning tree device to work in RSTP mode.
mstp: Configures the spanning tree device to work in MSTP mode.
Description
Use stp mode to configure the spanning tree work mode.
Use undo stp mode to restore the default.
By default, a spanning tree device works in MSTP mode.
Related commands: stp mcheck and stp enable.
Examples
# Configure the spanning tree device to work in STP-compatible mode.
<Sysname> system-view
[Sysname] stp mode stp
stp no-agreement-check
Syntax
stp no-agreement-check
undo stp no-agreement-check
View
Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use stp no-agreement-check to enable No Agreement Check on the ports.
Use undo stp no-agreement-check to disable No Agreement Check on the ports.
By default, No Agreement Check is disabled.
Configured in Ethernet interface view, the setting takes effect on the interface only.
Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface.
Configured on a member port in an aggregation group, the setting takes effect only after the port leaves
the aggregation group.
This feature takes effect only after you enable it on the root port.
Examples
# Enable No Agreement Check on GigabitEthernet 0/1.