R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

101
To set the priority of an MSTP device in a specific MSTI, use this command with the MSTI specified. To set
the priority of an MSTP device in the CIST or an STP/RSTP device, use this command without specifying
any MSTI.
Examples
# In MSTP mode, set the device priority to 4096 in MSTI 1.
<Sysname> system-view
[Sysname] stp instance 1 priority 4096
stp region-configuration
Syntax
stp region-configuration
undo stp region-configuration
View
System view
Default level
2: System level
Parameters
None
Description
Use stp region-configuration to enter MST region view.
Use undo stp region-configuration to restore the default MST region configurations.
These are the default settings for the MST region:
• The MST region name of the device is the MAC address of the device.
• All VLANs are mapped to the CIST.
• The MSTP revision level is 0.
After you enter MST region view, you can configure the MST region-related parameters, including the
region name, VLAN-to-instance mappings, and revision level.
Examples
# Enter MST region view.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region]
stp root primary
Syntax
stp [ instance instance-id ] root primary
undo stp [ instance instance-id ] root
View
System view