R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

110
PPP configuration commands
NOTE:
The firewall module does not support dialer interfaces.
Basic PPP configuration commands
ip address ppp-negotiate
Syntax
ip address ppp-negotiate
undo ip address ppp-negotiate
View
Virtual template (VT) Interface view
Default level
2: System level
Parameters
None
Description
Use ip address ppp-negotiate to enable IP address negotiation on the local interface, so that the local
interface can accept the IP address allocated by the peer end.
Use undo ip address ppp-negotiate to disable IP address negotiation.
By default, IP address negotiation is disabled.
Related commands: remote address and ppp ipcp remote-address forced.
Examples
# Enable IP address negotiation on interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10] ip address ppp-negotiate
ip pool
Syntax
ip pool pool-number low-ip-address [ high-ip-address ]
undo ip pool pool-number
View
System view, ISP domain view