R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

112
Examples
# Enable PPP encapsulation on Dialer 1.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer 1] link-protocol ppp
ppp account-statistics enable
Syntax
ppp account-statistics enable [ acl { acl-number | name acl-name } ]
undo ppp account-statistics enable
View
VT interface view
Default level
2: System level
Parameters
acl: Generates PPP accounting statistics for traffic that matches the configured ACL. If no ACL is
configured, the firewall generates PPP accounting statistics for all traffic.
acl-number: ACL number, in the range of 2000 to 3999, where:
• 2000 to 2999 are numbers for basic IPv4 ACLs.
• 3000 to 3999 are numbers for advanced IPv4 ACLs.
name acl-name: Specifies an ACL by its name. The acl-name represents the name of an IPv4 ACL, a
case-sensitive string that starts with an English letter and contains 1 to 63 characters. To avoid confusion,
do not use the English word all as an IPv4 ACL name.
Description
Use ppp account-statistics enable to enable PPP traffic statistics collection.
Use undo ppp account-statistics enable to disable PPP traffic statistics collection.
By default, PPP traffic statistics collection is disabled.
Examples
# Enable PPP traffic statistics collection on interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10] ppp account-statistics enable
ppp authentication-mode
Syntax
ppp authentication-mode { chap | ms-chap | ms-chap-v2 | pap } * [ [ call-in ] domain isp-name ]
undo ppp authentication-mode
View
VT interface view