R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

119
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10] remote address 10.0.0.1
[Sysname-Virtual-Template10] ppp ipcp remote-address forced
ppp pap local-user
Syntax
ppp pap local-user username password { cipher | simple } password
undo ppp pap local-user
View
VT interface view
Default level
2: System level
Parameters
username: Username of the local device for PAP authentication, a case-sensitive string of 1 to 80
characters.
cipher: Displays the password in cipher text.
simple: Displays the password in plain text.
password: Password of the local device for PAP authentication, a case-sensitive string of 1 to 48
characters. When the simple keyword is specified, provide this argument in plain text. When the cipher
keyword is specified, provide this password in either cipher text or plain text. When provided in plain text,
the password can contain no more than 48 characters (such as aabbcc); when provided in cipher text,
the password must be fixed to 24 or 64 characters, such as _(TT8F]Y\5SQ=^Q`MAF4<1!! and
VV-F]7R%,TN$C1D*)O<-;<IX)aV\KMFAM(0=0\)*5WWQ=^Q`MAF4<<"TX$_S#6.N.
Description
Use ppp pap local-user to set the local username and password for PAP authentication.
Use undo ppp pap local-user to cancel the local username and password configured.
By default, the username and the password for PAP authentication are not set.
For the local device to pass PAP authentication on the remote device, make sure that the same username
and password configured for the local device are also configured on the remote device with the
commands local-user username and password { cipher | simple } password.
Related commands: local-user and password.
Examples
# Configure the local username and password for PAP authentication as user1 and pass1 (in plain text).
<Sysname> system-view
[Sysname] interface Virtual-Template 10
[Sysname-Virtual-Template10] ppp pap local-user user1 password simple pass1
ppp timer negotiate
Syntax
ppp timer negotiate seconds