R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

127
For the output description, see Table 25.
interface virtual-template
Syntax
interface virtual-template number
undo interface virtual-template number
View
System view
Default level
2: System level
Parameters
number: VT interface number, in the range 0 to 1023.
Description
Use interface virtual-template to create a VT interface and enter its view. If the VT interface already exists,
you enter its view directly.
Use undo interface virtual-template to remove a VT interface.
To remove a VT interface, make sure that all the corresponding VA interfaces are removed and the VT
interface is not in use.
Examples
# Create interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10]
mtu
Syntax
mtu size
undo mtu
View
VT interface view
Default level
2: System level
Parameters
size: MTU in bytes, in the range of 128 to 1500.
Description
Use mtu to set the MTU size of the interface.
Use undo mtu to restore the default.
By default, the MTU of an interface is 1500 bytes.