R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

129
PPPoE configuration commands
NOTE:
The firewall module does not support dialer interfaces.
PPPoE configuration commands are available on the F1000-A-EI/S-EI, F1000-E firewalls.
display pppoe-client session
Syntax
display pppoe-client session { packet | summary } [ dial-bundle-number number ] [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
packet: Displays the packet statistics on PPPoE sessions.
summary: Displays PPPoE session summary.
dial-bundle-number number: Displays the statistics on a PPPoE session. The number argument ranges
from 1 to 255. If this option is not specified, this command displays the statistics on all the PPPoE sessions.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pppoe-client session to display information about a PPPoE session.
Examples
# Display PPPoE session summary.
<Sysname> display pppoe-client session summary
PPPoE Client Session:
ID Bundle Dialer Intf RemMAC LocMAC State
1 1 1 GE0/1 00e014004300 00e015004100 PPPUP
1 2 2 GE0/2 00e015004300 00e016004100 PPPUP