R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

137
Default level
2: System level
Parameters
id: ID of an existing inline forwarding entry.
Description
Use port inline-interfaces to assign the interface to the specified inline forwarding entry.
Use undo port inline-interfaces to remove the interface from the inline forwarding entry.
A forward-type inline forwarding entry must contain two interfaces; otherwise, it does not take effect. If
only one interface is assigned, the interface performs general Layer 2 forwarding.
A reflect-type or blackhole-type inline forwarding entry can contain only one interface.
Examples
# Assign GigabitEthernet 0/1 and GigabitEthernet 0/2 to forward-type inline forwarding entry 2.
<Sysname> system-view
[Sysname] inline-interfaces 2
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet0/1] port inline-interfaces 2
[Sysname-GigabitEthernet0/1] interface GigabitEthernet 0/2
[Sysname-GigabitEthernet0/2] port inline-interfaces 2