R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

143
dhcp server ip-pool
Syntax
dhcp server ip-pool pool-name [ extended ]
undo dhcp server ip-pool pool-name
View
System view
Default level
2: System level
Parameters
pool-name: Global address pool name, which is a unique pool identifier, a string of 1 to 35 characters.
extended: Specifies the address pool as an extended address pool. If this keyword is not specified, the
address pool is a common address pool.
Description
Use dhcp server ip-pool to create a DHCP address pool and enter its view. If the pool was created, you
will directly enter its view.
Use undo dhcp server ip-pool to remove the specified DHCP address pool.
By default, no DHCP address pool is created.
Related commands: dhcp enable and display dhcp server tree.
Examples
# Create the common address pool identified by 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]
dhcp server ping packets
Syntax
dhcp server ping packets number
undo dhcp server ping packets
View
System view
Default level
2: System level
Parameters
number: Number of ping packets, in the range of 0 to 10. 0 means no ping operation.
Description
Use dhcp server ping packets to specify the maximum number of ping packets on the DHCP server.
Use undo dhcp server ping packets to restore the default.