R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

145
dhcp server relay information enable
Syntax
dhcp server relay information enable
undo dhcp server relay information enable
View
System view
Default level
2: System level
Parameters
None
Description
Use dhcp server relay information enable to enable the DHCP server to handle Option 82.
Use undo dhcp server relay information enable to configure the DHCP server to ignore Option 82.
By default, the DHCP server handles Option 82.
Examples
# Configure the DHCP server to ignore Option 82.
<Sysname> system-view
[Sysname] undo dhcp server relay information enable
dhcp server threshold
Syntax
dhcp server threshold { allocated-ip threshold-value | average-ip-use threshold-value | max-ip-use
threshold-value }
undo dhcp server threshold { allocated-ip | average-ip-use | max-ip-use }
View
System view
Default level
2: System level
Parameters
allocated-ip threshold-value: Enables the DHCP server to send trap messages to the network
management server when the ratio of successfully allocated IP addresses to received DHCP requests
within five minutes reaches the threshold specified by the threshold-value argument. The threshold is a
percentage value ranging from 1 to 100.
average-ip-use threshold-value: Enables the DHCP server to send trap messages to the network
management server when the average IP address utilization of an address pool within five minutes
reaches the threshold specified by the threshold-value argument. The threshold is a percentage value
ranging from 1 to 100.
max-ip-use threshold-value: Enables the DHCP server to send trap messages to the network management
server when the maximum IP address utilization of an address pool within five minutes reaches the