R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

188
Description
Use display dhcp relay server-group to display the configuration information of a specified or all DHCP
server groups.
Examples
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
No. Group IP
1 1.1.1.1
2 1.1.1.2
Table 40 Command output
Field Descri
p
tion
No. Sequence number
Group IP IP address in the server group
display dhcp relay statistics
Syntax
display dhcp relay statistics [ server-group { group-id | all } ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-id: Specifies a server group number in the range of 0 to 19 about which to display DHCP packet
statistics.
all: Specifies all server groups about which to display DHCP packet statistics. Information for each group
is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display dhcp relay statistics to display DHCP packet statistics related to a specified or all DHCP
server groups.
If no parameter (server-group and all) is specified, all DHCP packet statistics on the relay agent is
displayed.
Related commands: reset dhcp relay statistics.