R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

208
system=dyndns&hostname=<h>&myip=<a>
SSL client policy:
Interval : 1 days 0 hours 1 minutes
Table 47 Command output
Field Description
DDNS policy DDNS policy name
URL URL address for the DDNS service. This field is empty if no URL address is configured
SSL client policy
Name of the associated SSL client policy. This field is empty if no associated SSL client
policy is configured
Interval Interval for sending DDNS update requests
interval
Syntax
interval days [ hours [ minutes ] ]
undo interval
View
DDNS policy view
Default level
2: System level
Parameters
days: Days, in the range of 0 to 365.
hours: Hours, in the range of 0 to 23.
minutes: Minutes, in the range of 0 to 59.
Description
Use interval to specify the interval for sending DDNS update requests after DDNS update is enabled.
Use undo interval to restore the default value.
By default, the DDNS update request interval is one hour.
A DDNS update request is initiated immediately after the primary IP address of the interface changes or
the link state of the interface changes from down to up, no matter whether the interval is reached.
If you specify the interval as 0, your device will not periodically initiate any DDNS update request, but
will initiate a DDNS update request when the primary IP address of the interface is changed or the link
state of the interface changes from down to up.
If you repeatedly execute the interval command with different time intervals specified, only the latest
configuration will take effect.
Related commands: display ddns policy.
Examples
# Set the interval for sending DDNS update requests to one day and one minute for the DDNS policy
named steven_policy.