R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

214
Related commands: display arp timer aging.
Examples
# Set aging time for dynamic ARP entries to 10 minutes.
<Sysname> system-view
[Sysname] arp timer aging 10
display arp
Syntax
display arp [ [ all | dynamic | static ] | vlan vlan-id | interface interface-type interface-number ] [ count
| verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from 1 to 4,094.
interface interface-type interface-number: Displays the ARP entries of the interface specified by the
argument interface-type interface-number.
count: Displays the number of ARP entries.
verbose: Displays detailed information about ARP entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression..
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display arp to display ARP entries in the ARP mapping table.
If no parameter is specified, all ARP entries are displayed.
Related commands: arp static and reset arp.
Examples
# Display detailed information about all ARP entries.
<Sysname> display arp all verbose
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
Vpn-instance Name