R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

217
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the name of a VPN, a case-sensitive string of 1 to 31 characters.
count: Displays the number of ARP entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display arp vpn-instance to display the ARP entries for a specified VPN.
Related commands: arp static and reset arp.
Examples
# Display ARP entries for the VPN instance named test.
<Sysname> display arp vpn-instance test
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S
naturemask-arp enable
Syntax
naturemask-arp enable
undo naturemask-arp enable
View
System view
Default level
2: System level
Parameters
None
Description
Use naturemask-arp enable to enable the support for ARP requests that are from a natural network.
Use undo naturemask-arp enable to restore the default.
By default, the support for ARP requests from a natural network is disabled.