R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

226
Table 49 Command output
Field Descri
p
tion
Classifier Class name and its match criteria
Operator
Match operator you set for the class. If the operator is AND, the class
matches the packets that match all its match criteria. If the operator is
OR, the class matches the packets that match any of its match criteria.
Rule(s) Match criteria
if-match
Syntax
if-match match-criteria
undo if-match match-criteria
undo if-match acl [ ipv6 ] { acl-number | name acl-name } [ update acl [ ipv6 ] { acl-number | name
acl-name } ]
View
Class view
Default level
2: System level
Parameters
match-criteria: Specifies a match criterion. Table 50 shows the available criteria.
acl [ ipv6 ] { acl-number | name acl-name }: Specifies an ACL already referenced in the class by the ACL
name or ACL number.
update acl [ ipv6 ] { acl-number | name acl-name }: Specifies a new ACL by its number or name to
replace the ACL already referenced by the class. Support for this keyword depends on your device
model.
Table 50 The value range for the
match-criteria argument
O
p
tion Descri
p
tion
acl [ ipv6 ] { acl-number | name acl-name }
Matches an ACL.
The acl-number argument ranges from 2000 to 4999 for an
IPv4 ACL, and 2000 to 3999 for an IPv6 ACL.
The acl-name argument is a case-insensitive string of 1 to 63
characters, which must start with an English letter from a to z
or A to Z, and to avoid confusion, cannot be all.
any Matches all packets.
dscp dscp-list
Matches DSCP values.
The dscp-list argument is a list of up to eight DSCP values. A
DSCP value ranges from 0 to 63.
destination-mac mac-address Matches a destination MAC address.