R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

1
Interface management commands
General Ethernet interface and subinterface
configuration commands
combo enable
Syntax
combo enable { copper | fiber }
View
Ethernet interface view (combo interface)
Default level
2: System level
Parameters
copper: Activates the copper combo port.
fiber: Activates the fiber combo port.
Description
Use combo enable to activate the copper or fiber combo port.
By default, the copper combo port is activated.
Combo interfaces are logical interfaces. A combo interface comprises one optical (fiber) port and one
electrical (copper) port. The two ports cannot work simultaneously. If one port is enabled, the other port
is automatically disabled.
Examples
# Activate the copper combo port of combo interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] combo enable copper
# Activate the fiber combo port of combo interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] combo enable fiber
default
Syntax
default