R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

239
Traffic policing configuration commands
display qos car interface
Syntax
display qos car interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos car interface to display the CAR settings and operational statistics on a specified
interface.
If no interface is specified, this command displays the CAR settings and operational statistics on all the
interfaces.
Examples
# Display the CAR settings and operational statistics on GigabitEthernet 0/1.
<Sysname> display qos car interface GigabitEthernet0/1
Interface: GigabitEthernet0/1
Direction: Inbound
Rule(s): If-match Any
CIR 10 (kbps), CBS 2000 (byte), EBS 0 (byte)
Green Action: pass
Red Action : discard
Green: 0/0 (Packets/Bytes)
Red : 0/0 (Packets/Bytes)
Direction: Outbound
Rule(s): If-match ACL 2002
CIR 10 (kbps), CBS 1875 (byte), EBS 0 (byte)
Green Action: pass