R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

255
Field Descri
p
tion
Verify-source
Indicates whether the source IP address is checked on
the received RIP routing updates
Networks Networks enabled with RIP
Configured peers Configured neighbors
Triggered updates sent Number of sent triggered updates
Number of routes changes Number of changed routes in the database
Number of replies to queries Number of RIP responses
display rip database
Syntax
display rip process-id database [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rip database to display active routes in the database of the specified RIP process, which are
sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
10.0.0.0/8, cost 1, ClassfulSumm
10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface
11.0.0.0/8, cost 1, ClassfulSumm
11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported
Table 57 Command output
Field Descri
p
tion
X.X.X.X/X Destination address and subnet mask