R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

257
Table 58 Command output
Field Description
Interface-name Name of an interface running RIP.
Address/Mask IP address and mask of the interface.
Version RIP version running on the interface.
MetricIn Additional routing metric added to the incoming routes.
MetricIn route policy
Name of the routing policy used to add the additional routing metric for
the incoming routes. If no routing policy is referenced, the field displays
Not designated.
MetricOut Additional routing metric added to the outgoing routes.
MetricOut route policy
Name of the routing policy used to add the additional routing metric for
the outgoing routes. If no routing policy is referenced, the field displays
Not designated.
Split-horizon
Indicates whether split-horizon is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether poison-reverse is enabled:
• on—Enabled.
• off—Disabled.
Input/Output
Indicates if the interface is allowed to receive (Input) or send (Output) RIP
messages:
• on—Means it is allowed.
• off—Means it is not allowed.
Default route
Indicates whether sending the default route to RIP neighbors is allowed:
• on—Means it is allowed.
• off—Means it is not allowed.
Current packets number/Maximum
packets number
Packets to be sent/Maximum packets that can be sent on the interface.
display rip route
Syntax
display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
ip-address { mask | mask-length }: Displays route information about a specified IP address.