R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

259
Table 60 Command output
Field Description
Peer IP address of a neighbor
Aging Total number of aging routes learned from the specified neighbor
Permanent Total number of permanent routes learned from the specified neighbor
Garbage Total number of routes in Garbage-collection state learned from the specified neighbor
Total Total number of routes learned from all RIP neighbors
filter-policy export (RIP view)
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] | interface-type
interface-number ]
undo filter-policy export [ protocol [ process-id ] | interface-type interface-number ]
View
RIP view
Default level
2: System level
Parameters
acl-number: Number of an ACL used to filter outbound routes, in the range of 2000 to 3999.
ip-prefix ip-prefix-name: Name of an IP prefix list used to filter outbound routes, a string of 1 to 19
characters.
protocol: Filters outbound routes redistributed from a specified routing protocol, which can be bgp, direct,
isis, ospf, rip, and static.
process-id: Process ID of the specified routing protocol, in the range of 1 to 65535. You need to specify
a process ID when the routing protocol is rip, isis, or ospf.
interface-type interface-number: Specifies an interface by its type and number.
Description
Use filter-policy export to configure the filtering of RIP outgoing routes. Only routes not filtered out can be
advertised.
Use undo filter-policy export to remove the filtering.
By default, RIP does not filter outbound routes.
The following matrix shows the argument and firewall compatibility:
Ar
g
ument F1000-A-EI/ S-EI F1000-E F5000 Firewall module
protocol
Yes.
Excludes isis.
Yes.
Excludes isis.
Yes.
Includes isis.
Yes.
Excludes isis.