R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

277
• Receives RIPv2 unicast messages
Examples
# Configure GigabitEthernet 0/1 to broadcast RIPv2 messages.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet0/1] rip version 2 broadcast
silent-interface (RIP view)
Syntax
silent-interface { interface-type interface-number | all }
undo silent-interface { interface-type interface-number | all }
View
RIP view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
all: Disables all interfaces from sending routing updates.
Description
Use silent-interface to disable an interface or all interfaces from sending routing updates. The interface
only receives but does not send RIP messages.
Use undo silent-interface to restore the default.
By default, all interfaces are allowed to send routing updates.
Examples
# Configure all interfaces to work in the silent mode, and activate GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] silent-interface all
[Sysname-rip-100] undo silent-interface GigabitEthernet 0/1
[Sysname-rip-100] network 131.108.0.0
summary
Syntax
summary
undo summary
View
RIP view
Default level
2: System level