R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

6
Field Descri
p
tion
Input Input packets.
Output Output packets.
# Display operating status information and related statistics of Layer 3 Ethernet subinterface
GigabitEthernet 0/1.1.
<Sysname> display interface gigabitethernet 0/1.1
GigabitEthernet0/1.1 current state: UP
Line protocol current state: UP
Description: GigabitEthernet0/1.1 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-000f-0006
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-000f-0006
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Table 2 Command output
Field Descri
p
tion
GigabitEthernet0/1.1 current state
State of the Ethernet subinterface:
• DOWN ( Administratively )—The Ethernet subinterface was shut
down with the shutdown command. The interface is
administratively down.
• DOWN ( Link-Aggregation interface down )—The Ethernet
subinterface is physically down because the aggregate interface
corresponding to the aggregation group to which the subinterface
belongs was shut down with the shutdown command.
• DOWN—The Ethernet subinterface is administratively up but
physically down (possibly because no physical link is present or the
link has failed).
• UP—The Ethernet subinterface is both administratively and
physically up.
Line protocol current state
Link layer state of the subinterface:
• DOWN—The interface is physically down.
• UP—The interface is physically up.
Internet protocol processing
Disabled indicates that IP packets cannot be processed.
For an interface configured with an IP address, this field changes to
Internet Address is.
IP Packet Frame Type Encapsulation format for IPv4 packets.
Hardware Address MAC address corresponding to the subinterface.
IPv6 Packet Frame Type Encapsulation format for IPv6 packets.