R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

287
The default-route-advertise summary cost command is applicable only to VPNs, and the default route is
redistributed in a Type-3 LSA. The PE router advertises the redistributed default route to the CE router.
Using the import-route command cannot redistribute a default route. To redistribute a default route, use
the default-route-advertise command.
If neither the always nor permit-calculate-other keyword is specified, the router generates a default route
in a Type-5 LSA into the OSPF routing domain only when an active default route that does not belong to
the current OSPF process exists in the IP routing table, and does not calculate default routes from other
routers.
Related commands: import-route and default.
Examples
# Generate a default route in an ASE LSA into the OSPF routing domain (no default route configured on
the router), regardless of whether the default route is available in the routing table.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default-route-advertise always
description (OSPF/OSPF area view)
Syntax
description description
undo description
View
OSPF view/OSPF area view
Default level
2: System level
Parameters
description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in OSPF
area view. description is a string of up to 80 characters.
Description
Use description to configure a description for an OSPF process or area.
Use undo description to remove the description.
No description is configured by default.
Use of this command is only for the identification of an OSPF process or area. The description has no
special meaning.
Examples
# Describe OSPF process 100 as abc.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] description abc
# Describe OSPF area 0 as bone area.
<Sysname> system-view
[Sysname] ospf 100