R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

310
Field Descri
p
tion
NSSA Total NSSA routes
display ospf vlink
Syntax
display ospf [ process-id ] vlink [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf vlink to display OSPF virtual link information.
If no OSPF process is specified, the OSPF virtual link information of all OSPF processes is displayed.
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (GigabitEthernet0/1)
Cost: 1562 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
Table 76 Command output
Field Descri
p
tion
Virtual-link Neighbor-ID ID of the neighbor on the virtual link
Neighbor-State Neighbor State: Down, Init, 2-Way, ExStart, Exchange, Loading, Full.
Interface IP address and name of the local interface on the virtual link
Cost Interface route cost