R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

324
Default level
2: System level
Parameters
None
Description
Use opaque-capability enable to enable opaque LSA advertisement and reception. With the command
configured, the OSPF device can receive and advertise the Type-9, Type-10 and Type-11 opaque LSAs.
Use the undo opaque-capability command to restore the default.
The feature is disabled by default.
Examples
# Enable advertising and receiving opaque LSAs.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] opaque-capability enable
ospf
Syntax
ospf [ process-id | router-id router-id | vpn-instance vpn- instance-name ] *
undo ospf [ process-id ]
View
System view
Default level
2: System level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
router-id router-id: OSPF Router ID, in dotted decimal format.
vpn-instance vpn-instance-name: Specifies a VPN that the OSPF process belongs to. vpn-instance-name
is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the OSPF process belongs to the
public network.
Description
Use ospf to enable an OSPF process.
Use undo ospf to disable an OSPF process.
No OSPF process is enabled by default.
You can enable multiple OSPF processes on a router and specify different Router IDs for these processes.
Enabling OSPF first is required before performing other tasks.
Examples
# Enable OSPF process 100 and specify Router ID 10.10.10.1.
<Sysname> system-view
[Sysname] ospf 100 router-id 10.10.10.1