R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

346
Ke
y
words Function
suppress-policy
Used to create a summary route and suppress the advertisement of some
summarized routes. If you want to suppress some routes selectively and leave
other routes still advertised, use the if-match clause of the route-policy command.
origin-policy Selects only routes satisfying the routing policy for route summarization.
attribute-policy
Sets attributes except the AS-PATH attribute for the summary route. The same
work can be done by using the peer route-policy command.
Description
Use aggregate to create a summary route in the BGP routing table.
Use undo aggregate to remove a summary route.
By default, no summary route is configured.
Examples
# In BGP view, create a summary of 192.213.0.0/16 in the BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] aggregate 192.213.0.0 255.255.0.0
# In BGP-VPN instance view, create a summary of 192.213.0.0/16 in BGP routing table (the VPN has
been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] aggregate 192.213.0.0 255.255.0.0
balance (BGP/BGP-VPN instance view)
Syntax
balance number
undo balance
View
BGP view, VPN instance view
Default level
2: System level
Parameters
number: Number of BGP routes for load balancing. When it is set to 1, load balancing is disabled.
All firewalls support the number argument, and the argument has different value ranges:
F1000-A-EI/S-EI F1000-E F5000 Firewall module
1 to 8 1 to 8 1 to 16 1 to 8
Description
Use balance to configure the number of BGP routes for load balancing.