R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

14
GE0/4 DOWN Not connected
GE0/5 DOWN Not connected
GE0/6 DOWN Not connected
GE0/7 DOWN Not connected
GE0/8 DOWN Not connected
GE0/9 DOWN Not connected
GE0/10 DOWN Not connected
GE0/11 DOWN Not connected
Table 6 Command output
Field Descri
p
tion
The brief information of
interface(s) under route
mode:
The command displays brief information about Layer 3 interfaces.
Link: ADM -
administratively down;
Stby - standby
ADM—The interface has been shut down by the network administrator. To
recover its physical layer state, perform the undo shutdown command.
Stby—The interface is a standby interface. You can use the display standby state
command to check the corresponding primary interface.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but its link is an
on-demand link or not present at all, its protocol attribute includes the spoofing
flag (an s in parentheses). This attribute is typical of interface Null 0 and the
loopback interfaces.
Interface Interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To recover its physical
state, perform the undo shutdown command.
• Stby—The interface is a standby interface.
Protocol Protocol connection state of the interface, which can be UP, DOWN, or UP(s).
The brief information of
interface(s) under bridge
mode:
Brief information about Layer 2 interfaces.
Speed or Duplex: (a)/A -
auto; H - half; F - full
If the speed of an interface is automatically negotiated, its speed attribute
includes the auto negotiation flag, letter a in parentheses.
If the duplex mode of an interface is automatically negotiated, its duplex mode
attribute includes the following options:
• (a)/A—Auto negotiation
• H—Half negotiation
• F—Full negotiation
Type: A - access; T - trunk;
H - hybrid
Link type options for Ethernet interfaces.
Speed Interface rate, in bps.