R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

390
By default, BFD is disabled.
The following matrix shows the command and firewall compatibility:
Command F1000-A-EI/S-EI F1000-E F5000 Firewall module
peer bfd No No Yes No
Examples
# E n a b l e B F D f o r B G P p e e r 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 bfd
peer capability-advertise conventional
Syntax
peer { group-name | ip-address } capability-advertise conventional
undo peer { group-name | ip-address } capability-advertise conventional
View
BGP view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer capability-advertise conventional to disable BGP multi-protocol extension and route refresh for
a peer/peer group.
Use undo peer capability-advertise conventional to enable BGP multi-protocol extension and route
refresh for a peer/peer group.
By default, BGP multi-protocol extension and route refresh are enabled.
Examples
# In BGP view, disable multi-protocol extension and route refresh for peer 160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise conventional
peer capability-advertise orf
Syntax
peer { group-name | ip-address } capability-advertise orf ip-prefix { both | receive | send }
undo peer { group-name | ip-address } capability-advertise orf ip-prefix { both | receive | send }