R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

403
Examples
# I n B G P vi ew, s a v e r o u t i n g i n f o r m a t i o n f ro m p e e r 131.10 0 .1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 131.100.1.1 as-number 200
[Sysname-bgp] peer 131.100.1.1 keep-all-routes
# In BGP-VPN instance view, save routing information from peer 131.100.1.1(The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer 131.100.1.1 as-number 200
[Sysname-bgp-vpn1] peer 131.100.1.1 keep-all-routes
peer log-change (BGP/BGP-VPN instance view)
Syntax
peer { group-name | ip-address } log-change
undo peer { group-name | ip-address } log-change
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer log-change to enable the logging of session state and event information for a specified peer or
peer group.
Use undo peer log-change to remove the configuration.
The logging is enabled by default.
Examples
# In BGP view, enable the logging of session state and event information for peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test log-change
# In BGP-VPN instance view, enable the logging of session state and event information for peer group
test (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test log-change