R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

23
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use sub-interface rate-statistic to enable rate statistics collection for the subinterfaces of an Ethernet
interface.
Use undo sub-interface rate-statistic to disable rate statistics collection for the subinterfaces of an
Ethernet interface.
By default, the system does not collect rate statistics for Ethernet subinterfaces.
IMPORTANT:
Use this function with caution, because it requires a large amount of system resources.
The following matrix shows the command and firewall compatibility:
Command F1000-A-EI/S-EI F1000-E F5000 Firewall module
sub-interface rate-statistic No Yes Yes Yes
Examples
# Enable rate statistics collection on the subinterfaces of GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet0/1] sub-interface rate-statistic
Layer 2 Ethernet interface and subinterface
configuration commands
broadcast-suppression
Syntax
broadcast-suppression ratio
undo broadcast-suppression
View
Layer 2 Ethernet interface view, Layer 2 Ethernet subinterface view
Default level
2: System level