R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

474
Related commands: area-authentication-mode, domain authentication-mode.
Examples
# Clear all IS-IS data structure information.
<Sysname> reset isis all
reset isis peer
Syntax
reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ]
View
User view
Default level
2: System level
Parameters
system-id: Specifies the system ID of an IS-IS neighbor.
process-id: Clears the data structure information of an IS-IS process with an ID from 1 to 65535.
vpn-instance vpn-instance-name: Clears the data structure information of the VPN. vpn-instance-name is
a case-sensitive string of 1 to 31 characters. If no VPN is specified, the data structure information of the
public network is cleared.
Description
Use reset isis peer to clear the data structure information of a specified IS-IS neighbor.
This command is used when you need to re-establish an IS-IS neighbor relationship.
Examples
# Clear the data structure information of the neighbor with the system ID 0000.0c11.1111.
<Sysname> reset isis peer 0000.0c11.1111
set-overload
Syntax
set-overload [ on-startup [ [ start-from-nbr system-id [ timeout1 [ nbr-timeout ] ] ] | timeout2 ] [ allow
{ external | interlevel } * ]
undo set-overload
View
IS-IS view
Default level
2: System level
Parameters
on-startup: Sets the overload bit upon system startup.
start-from-nbr system-id [ timeout1 [ nbr-timeout ] ]: Starts the nbr-timeout timer when the router begins
to establish the neighbor relationship with the neighbor after system startup. If the neighbor relationship
is formed within the nbr-timeout interval, IS-IS keeps the overload bit set; if not, the bit is cleared. IS-IS