R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

478
The default LSP maximum age is 1200 seconds.
Related commands: timer lsp-refresh.
Examples
# Set the maximum LSP age to 1500 seconds.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] timer lsp-max-age 1500
timer lsp-refresh
Syntax
timer lsp-refresh seconds
undo timer lsp-refresh
View
IS-IS view
Default level
2: System level
Parameters
seconds: LSP refresh interval in seconds, ranging from 1 to 65534.
Description
Use timer lsp-refresh to configure the LSP refresh interval.
Use undo timer lsp-refresh to restore the default.
The default LSP refresh interval is 900 seconds.
Related commands: timer lsp-max-age.
NOTE:
To refresh LSPs before they are aged out, the interval configured by the timer lsp-refresh command mus
t
be smaller than that configured by the timer lsp-max-age command.
Examples
# Configure the LSP refresh interval as 1500 seconds.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] timer lsp-refresh 1500
timer spf
Syntax
timer spf maximum-interval [initial-interval [second-wait-interval ] ]
undo timer spf
View
IS-IS view