R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

489
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip routing-table ip-address to display information about routes to a specified destination
address.
Executing the command with different parameters yields different output:
• display ip routing-table ip-address
{ The system ANDs the input destination IP address with the subnet mask in each route entry.
{ The system ANDs the destination IP address in each route entry with its own subnet mask.
{ If the two operations yield the same result for an entry and this entry is active, it is displayed.
• display ip routing-table ip-address mask
{ The system ANDs the input destination IP address with the input subnet mask.
{ The system ANDs the destination IP address in each route entry with the input subnet mask.
{ If the two operations yield the same result for an entry and the entry is active with a subnet mask
less than or equal to the input subnet mask, the entry is displayed.
Only route entries that exactly match the input destination address and mask are displayed.
• display ip routing-table ip-address longer-match
{ The system ANDs the input destination IP address with the subnet mask in each route entry.
{ The system ANDs the destination IP address in each route entry with its own subnet mask.
{ If the two operations yield the same result for multiple entries that are active, the one with
longest mask length is displayed.
• display ip routing-table ip-address mask longer-match
{ The system ANDs the input destination IP address with the input subnet mask.
{ The system ANDs the destination IP address in each route entry with the input subnet mask.
{ If the two operations yield the same result for multiple entries with a mask less than or equal to
the input subnet mask, the one that is active with longest mask length is displayed.
Use display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length | mask } to
display route entries with destination addresses within a specified range.
Examples
# Display route entries for the destination IP address 11.1.1.1.
<Sysname> display ip routing-table 11.1.1.1
Routing Table : Public
Summary Count : 4
Destination/Mask Proto Pre Cost NextHop Interface
0.0.0.0/0 Static 60 0 0.0.0.0 NULL0
11.0.0.0/8 Static 60 0 0.0.0.0 NULL0
11.1.0.0/16 Static 60 0 0.0.0.0 NULL0
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0