R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

508
Multicast routing and forwarding configuration
commands
The term "router" in this document refers to both routers and Layer 3 firewalls.
delete ip rpf-route-static
Syntax
delete ip rpf-route-static
View
System view
Default level
2: System level
Parameters
None
Description
Use delete ip rpf-route-static to delete all static multicast routes.
Related commands: ip rpf-route-static.
Examples
# Delete all static multicast routes on the public network.
<Sysname> system-view
[Sysname] delete ip rpf-route-static
This will erase all static multicast routes and their configurations, you must reconfigure
all static routes
Are you sure?[Y/N]:
display multicast boundary
Syntax
display multicast boundary [ group-address [ mask | mask-length ] ] [ interface interface-type
interface-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Mask of the multicast group address, 255.255.255.255 by default.