R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

514
display multicast routing-table static
Syntax
display multicast routing-table static [ source-address { mask-length | mask } ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Multicast source address.
mask: Mask of the multicast source address.
mask-length: Mask length of the multicast source address, in the range of 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast routing-table static to display information about static multicast routes.
Examples
# Display all the static multicast routes on the public network.
<Sysname> display multicast routing-table static
Routes : 1
Mroute 10.10.0.0/16
Interface = GigabitEthernet0/1 RPF Neighbor = 2.2.2.2
Matched routing protocol = <none>, Route-policy = <none>
Preference = 1, Order = 1
Running Configuration = ip rpf-route-static 10.10.0.0 16 2.2.2.2 order 1
Table 115 Command output
Field Descri
p
tion
Mroute Multicast route source address and its mask length
Interface Outgoing interface to the multicast source
RPF Neighbor IP address of the RPF neighbor through which the multicast source is reachable
Route-policy
Routing policy. The multicast source address of the route should match the
routing policy.
Preference Route preference