R3721-F3210-F3171-HP High-End Firewalls Network Management Command Reference-6PW101

515
Field Descri
p
tion
Order Sequence number of the route
Running Configuration Command line that configures the static multicast route
display multicast rpf-info
Syntax
display multicast rpf-info source-address [ group-address ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast rpf-info to display RPF information of a multicast source.
Related commands: display multicast forwarding-table and display multicast routing-table.
Examples
# Display all the RPF information of multicast source 192.168.1.55 on the public network.
<Sysname> display multicast rpf-info 192.168.1.55
RPF information about source 192.168.1.55:
RPF interface: GigabitEthernet0/1, RPF neighbor: 10.1.1.1
Referenced route/mask: 192.168.1.0/24
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 116 Command output
Field Descri
p
tion
RPF information about source
192.168.1.55
Information of the RPF path to multicast source 192.168.1.55
RPF neighbor IP address of the RPF neighbor